logo

Shocker MINDSTORMS Challenge

The Ascent

 

Apprentice Mission (Intermediate and Expert)

 

Story

Not all things of value are found at ground level.  Take care as you ascend the heights to release the targets and earn the points.

Bill Of Materials

Component Availability

Price

(Before Tax)

Minimum Required Quantity (single pieces, not pacages needed)
Round Ceramic Magnets - 1/2" (Came in a package of 15) Hobby Lobby 2.69 8
Round Wood Balls - 1 1/2" (Came in a package of 8) Hobby Lobby 3.99 4
1 x 2 x 10' Select Pine Board
(Actual Size 3/4" x 1-1/2" x 10')
Menards 5.99 2
1 x 4 x 10' Rough Sawn Pine Board
(Actual Size 13/16" x 3-1/2" x 10')
Menards 5.99 1
2 x 4 x 8' Premium Construction/Framing Lumber
(Actual Size 1-1/2" x 3-1/2" x 8')
Menards 6.99 2
1/4 x 4 x 8 Sanded Utility Plywood
(Actual Size .185" x 48" x 95-7/8")
Menards 13.49 1
Rust-Oleum® Painter's Touch® 2X Ultra Cover® Flat Black General Purpose Spray Paint - 12 oz. Menards 3.96 1
Rust-Oleum® Painter's Touch® 2X Ultra Cover® Satin Leafy Green General Purpose Spray Paint - 12 oz Menards 3.96 1
Rust-Oleum® Painter's Touch® 2X Ultra Cover® Satin Summersquash General Purpose Spray Paint - 12 oz. Menards 3.96 1
Rust-Oleum® Painter's Touch® 2X Ultra Cover® Satin Ink Blue General Purpose Spray Paint - 12 oz. Menards 3.96 1
Rust-Oleum® Painter's Touch® 2X Ultra Cover® Satin Poppy Red General Purpose Spray Paint - 12 oz. Menards 3.96 1
Max Load® 15' x 1" Red Ratchet Strap Tie Down Menards 3.99 1
KingCord® 5/32" x 75' Black Polyester Paracord Rope Menards 3.99 1
Grip Fast® #8 x 1-1/2" Phillips Flat Head Particleboard Screw -50 Count Menards 1.89 4
Grip Fast® #6 x 1" Phillips Flat Head Particleboard Screws - 50 Count Menards 1.89 28
National Hardware® 3" x 3/4" Zinc Corner Brace Menards 1.29 2
National Hardware® 5" x 1" Zinc Corner Brace Menards 2.69 8
Madison Mill 3/8" x 48" Poplar Round Dowel Menards  0.87 1
Titebond® Original Wood Glue - 16 oz. Menards 3.97 1
Super Glue Menards 5.31 1
3/8" X 1" Hex Head Lag Screws (Head diameter, not shank diameter) Ace Hardware 0.43 32

 

Scoring Matrix Points
Entire robot must begin below the 1/4 mark and be in contact with the course base.  
Robot is fully off the course base 100
Robot is fully past the ¼ mark  200
Robot is fully past the ½ mark 100
1st long target knocked off, while robot is fully off the course base 100
2nd long target knocked off, while robot is fully off the course base 100
1st short target knocked off, while robot is fully off the course base 200
2nd short target knocked off, while robot is fully off the course base 200
  1000

                    The Ascent Build Instructions